Solvent Recycler RAF 15

X

Description

The RAF 15 solvent regenerator was produced for customers with a relatively small amount of dirty solvent, e.g. paint shops. The distiller cleans the contaminated solvent from substances such as: paints, oils, fats, resins.

The RAF 15 solvent distiller is constructed of a powder-coated housing, a tank with a working volume of 15 liters and a base that allows it to be tilted.

The ease of use of the device is increased by the possibility of using distillation bags, which means that the operator does not come into contact with the distillation waste and the interior of the distiller’s tank is not contaminated, and the sludge can be easily disposed of in accordance with the regulations.

The maintenance of the RAF 15 solvent distiller is kept to a minimum, put the Redux Bags distillation bag in the 15 liter tank, place the expansion clip, pour in the dirty solvent, set the distillation temperature and turn on the distiller. After a period of about 30-40 minutes, the distillation of the solvent will begin, which, after changing the state of aggregation from vapor to liquid using an air cooler, will begin to flow into the canister outside. After the end of the process, the distillate can be reused immediately.

The RAF 15 series distillers have been manufactured in accordance with strict European Union standards, have ATEX certificates and have undergone numerous tests.

RAF 15 series distillers are equipped with a tank with a working capacity of 15 liters and a lid made of INOX 304 stainless steel, an external casing made of welded, powder-coated sheet metal and an electric heater.

All RAF 15 models, depending on the customer’s needs, can be equipped with a copper CU cooler or an acid-resistant INOX cooler with air cooling.

In order to facilitate the observation of the distillation process, the RAF 15 distiller is equipped with two temperature indicators. Oil and distillate temperature indicators.

RAF 15 solvent distillers are available with electrical installation in the ADT version as well as in the explosion-proof EEXD version.

The VACUM SYSTEM REDUX pneumatic vacuum generator is required to distill solvents with boiling point above 160 ° C.

Technical specification

Additional equipment

Clip

The expanding ring is used to support and correctly position the Redux Bags distillation bag in the distiller tank.

Loading pump

The solvent-resistant pneumatic loading pump is used to fill the tanks of the RAF Series distillers with the liquid intended for distillation.

The sight glasses

The sight glasses are mounted in the lids of the RAF Series distillers to allow observation of the distillation process and to allow the loading of dirty solvent or water using the loading pump in the distillers without the maximum level float.

Pneumatic and electric vacuum

Vacuum device is used for the distillation of high-boiling solvents with a boiling point above 160 ° C. The use of Vacuum lowers the boiling point of the liquid by about 20-25%. We use Vacuum vacuum devices powered by air or electric in our distillers.

DTR video

DTR

• Instructions for use RAF 15 (pdf)

Exploitation materials

The anti-adhesive

Application:

The anti-adhesive paste is intended for use in solvent distillers. The paste covers the inside of the distiller barrel to prevent paint pigments and other contaminants from sticking to the walls.

The paste also prevents the distillation bag from sticking to the walls of the boiler (digester) in the event of dirty solvent getting outside the bag (e.g. incorrect filling of the above-mentioned boiler).

Types of packaging: 210ml, 1kg, 4.5kg, 10kg

Gasket grease

Application:

Gasket grease is used to prevent the gasket from sticking to the edge of the tank, as well as to improve the sealing between the gasket and the edge of the distiller tank.

Types of packaging: 200ml, 1 kg

Diathermic oil

Application:

We use diathermic oil in solvent distillers as a medium to transfer the heat generated by electric heaters to heat the heating boiler (distiller cooker) which then brings the solvent contained in it to a boil.

Oil in solvent distillers is changed every 1000 hours of device operation or every 12 months, whichever comes first.

Types of packaging: 5L, 10L, 20L

Distillation bags

Application:

REDUX BAGS distiller bags are used in all solvents commonly used in the industry, the boiling point of which does not exceed 200°C. We offer bags with dimensions matching the distillers of all manufacturers.

The bags are used for:

• Elimination of the risk of deposition of distillation waste on the walls of the tank
• Reduce staff costs and time by making it easier to clean the distiller tank
• They minimize the operator’s contact with distillation waste and minimize its impact on the environment

Dimensions:

We offer distiller bags for all types of distillers with a tilting and replaceable tank.

Photos

For download

• Dimensions RAF 15 (pdf)