Solvent Recycler RAF 20

X

Description

The RAF 20 solvent distiller is the latest line of tilting distillers with a permanently installed vessel. It has been designed to meet the needs of users who need to clean about 40 liters of contaminated solvent in a 12-hour period from substances such as: paint pigments, oils, fats, resins.

The RAF 20 regenerator for solvents has been designed, for example, for small repair workshops. The distiller cleans the solvent of substances such as: paints, oils, fats, resins.

The use of distillation bags means that the inside of the distiller’s tank is not dirty, the sludge can be easily disposed of in accordance with the regulations. The bags ensure that the operator does not come into contact with the distillation waste.

The RAF 20 solvent distiller is very easy to operate. The method of operation is presented in the instructional video on the REDUX website.

The RAF 20 series distillers are manufactured in Poland by Redux in accordance with the strict standards of the European Union and have ATEX certificates.

The RAF 20 solvent distiller is equipped with a tank with a working capacity of 20 liters and covers made of INOX stainless steel, an electric heater and an outer casing made of welded steel, powder coated.

The RAF 20 model can be equipped with a copper CU cooler or an INOX acid-proof cooler with air cooling.

In order to facilitate the observation of the distillation process, the RAF 20 still can be equipped with sight glasses.

To observe the temperature of oil and vapors, the distiller is equipped with capillary indicators.

We produce the RAF 20 solvent distiller with an electrical installation in the ADT version and in the EEXD anti-explosion version.

The VACUM SYSTEM REDUX pneumatic vacuum generator is required to distill solvents with boiling point above 160 ° C.

Technical specification

Additional equipment

Clip

The expanding ring is used to support and correctly position the Redux Bags distillation bag in the distiller tank.

Loading pump

The solvent-resistant pneumatic loading pump is used to fill the tanks of the RAF Series distillers with the liquid intended for distillation.

The sight glasses

The sight glasses are mounted in the lids of the RAF Series distillers to allow observation of the distillation process and to allow the loading of dirty solvent or water using the loading pump in the distillers without the maximum level float.

Pneumatic and electric vacuum

Vacuum device is used for the distillation of high-boiling solvents with a boiling point above 160 ° C. The use of Vacuum lowers the boiling point of the liquid by about 20-25%. We use Vacuum vacuum devices powered by air or electric in our distillers.

DTR video

DTR

• Instructions for use RAF 20 (pdf)

Exploitation materials

The anti-adhesive

Application:

The anti-adhesive paste is intended for use in solvent distillers. The paste covers the inside of the distiller barrel to prevent paint pigments and other contaminants from sticking to the walls.

The paste also prevents the distillation bag from sticking to the walls of the boiler (digester) in the event of dirty solvent getting outside the bag (e.g. incorrect filling of the above-mentioned boiler).

Types of packaging: 210ml, 1kg, 4.5kg, 10kg

Gasket grease

Application:

Gasket grease is used to prevent the gasket from sticking to the edge of the tank, as well as to improve the sealing between the gasket and the edge of the distiller tank.

Types of packaging: 200ml, 1 kg

Diathermic oil

Application:

We use diathermic oil in solvent distillers as a medium to transfer the heat generated by electric heaters to heat the heating boiler (distiller cooker) which then brings the solvent contained in it to a boil.

Oil in solvent distillers is changed every 1000 hours of device operation or every 12 months, whichever comes first.

Types of packaging: 5L, 10L, 20L

Distillation bags

Application:

REDUX BAGS distiller bags are used in all solvents commonly used in the industry, the boiling point of which does not exceed 200°C. We offer bags with dimensions matching the distillers of all manufacturers.

The bags are used for:

• Elimination of the risk of deposition of distillation waste on the walls of the tank
• Reduce staff costs and time by making it easier to clean the distiller tank
• They minimize the operator’s contact with distillation waste and minimize its impact on the environment

Dimensions:

We offer distiller bags for all types of distillers with a tilting and replaceable tank.

Photos

For download

• Dimensions RAF 20 (pdf)